Kill Switch Location

"What I intend to do." If you search this you can find photos of switches mounted in the trunk in such a way that a pushrod extends out say, the bottom of the tail lamp. You can turn this into anti-theft if it's a street car. Use a rod and sleeve that slide into each other, with a collar on the outer end to keep the exterior knob/ rod in place. "Rig" it (as per rules) so that it pushes for off. But pulling it back out won't turn it on, as it just slips the rod inside the sleeve. Use a GOOD QUALITY 4 terminal switch, and wire the small two in such a way as to kill the ignition or voltage regulator / field wiring. This prevents "after run." If you have EFI you can kill the pump relay