Something In my #5 Cylinder?

Walker434 said
Yes, pulled the engine on Saturday. 7 of the 8 pistons were damaged but luckily the heads still look good and none of the cylinders appear to be hurt. The short block is at the machine shop. As long as the bearings all still look good and check out I'll just be putting in new pistons and rings. Probably go with a little more ring gap this time.

I just had the same thing happen to me, ring popped a chunk of piston off, piston chunk smashed the plug. Make sure to look over your heads good, the exhaust valve in that cylinder had bent from smashing piston chunks between the valve and valve seat. It looked okay and I was about to call the heads good. Spinning the valve in a drill is an easy way to see if it's still straight.