340 camshaft

My car is not too far from your setup, but probably heavier. I thought the Comp XE275HL looked like a pretty good fit and picked up the cam/lifter kit. I was going to run it with a 1.6 rocker which would put the lift around .560". Not sure I am going to use it now because a few things in my setup will be changing and I'm thinking of going to a solid.

Cam Style: Hydraulic flat tappet
Basic Operating RPM Range: 2,000-5,800
Intake Duration at 050 inch Lift: 231
Exhaust Duration at 050 inch Lift: 237
Duration at 050 inch Lift: 231 int./237 exh.
Advertised Intake Duration: 275
Advertised Exhaust Duration: 287
Advertised Duration: 275 int./287 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.525 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.525 in.
Valve Lift with Factory Rocker Arm Ratio: 0.525 int./0.525 exh.
Lobe Separation (degrees): 110