Stop in for a cup of coffee

-
The Honey Do list of course!
I don’t know!

I’m hoping this plate will finally be the one that works, if it is, I will attempt to fire the Polara.

47DDA6A4-F2B2-4915-9B11-3595EE20ACB1.jpeg
 
Bring me up to speed on the dip stick problem. Poly 318?
Ok, cliff notes. I booked my jacket sleeve on the one in the engine when I was changing the fuel pump a while back. It broke it off right the little bubble. I used a bolt extractor and removed the little stub left in the block.

Since then, I have tried two part store replacements that are said to be for the poly, both too big, a good 1/8 inch bigger diameter on both ends. Same with the Chrome Direct Connection LA dipstick I’d bought off here a while back. I tried a factory 318LA from a spare engine as well, no such luck. Unfortunately my spare poly is already missing the dipstick and my wanted ads have gone unanswered.

So I’m thinking I either braze the poly dipstick back together, or braze the dang thing to the block somehow
 
I have a 59 poly parts engine and a complete 66. I can see if I can pull it off the 59 but it can take me a day to get it
 
Good morning and Happy Weekend to you guys. Gotta run to the post office, they are open a whopping 60 minutes on Saturdays, 9 to 10 am. Headed to FL Mon morning to spend a few days with my Mom.
 
Good morning and Happy Weekend to you guys. Gotta run to the post office, they are open a whopping 60 minutes on Saturdays, 9 to 10 am. Headed to FL Mon morning to spend a few days with my Mom.

Now that's worth doing, have a good visit!
 
Checking out for awhile, the weekend grind of propane and water refilling, laundromat etc. On a happier note I will probably pull my engine hoist out of storage to unload/open my lift, had it for several weeks and haven't made time to uncrate it.
 
I have a 59 poly parts engine and a complete 66. I can see if I can pull it off the 59 but it can take me a day to get it
dude, that’d be awesome! Thanks
If it doesnt, make a paper pattern out of a folder and I'll make you one in January when I'm home next.
Sweet thanks!
Is that the "one size fits all"? :rolleyes:
No. This is actually a Holley to a Rochester 4Q adapter. Which according to the data available never came on a poly intake but the measurements say other wise
Hey Chris, @dukeboy_318 Is the intake bolt pattern the inside holes on the adapter?

View attachment 1715437631

View attachment 1715437632
yes
 
Drank a bit much last night. Went through the woman's closet full of craft stuff. Seems she had half the inventory of a Hobby Lobby store. Well, i ended up dipping my testicles in glitter... It was pretty nuts.

I bought a pair of gym shoes from a drug dealer...

I don't know what he laced them with, but I've been tripping all day... :D
 
-
Back
Top