67 Barracuda suspension V2.0
New day Replacing the lower ball joints. The originals were good so I re-used them the first time.
The new lower ball joint installed.
The cam eccentrics set for maximum out forward and maximum inboard rear.
Another of the cam adjustment settings to bring the upper ball joint aft as far as possible. The alignment shop can put the numbers in that I want now.
The completed assembly back together. I had to remove the brake pads from the calipers to get it all reinstalled.
The parts left over, some of them are still good
That completes this thread. I have decided to start a new one detailing my rear sway bar install. Cheers to all-------------------------