Chassis restoration info needed

What I can think of off the top of my head.

Front Suspension

• K-Frame: Semigloss Black
• K-Frame Mounting Bolts: Phosphate and oil
• Lower Control Arm Nuts: Phosphate and oil
• Lower Control Arms: Bare Metal dipped in cosmoline. Left side torsion key is blue. Right side torsion key is orange.
• Torsion Bar Adjusters: All cadmium or all phosphate and oil or a combination of the two.
• Strut Rods: Bare metal
• Strut Rod Hardware: Phosphate and oil
• Strut Rod Roll Pins: Bare metal
• Spindles: Bare metal
• Center Link: Bare metal
• Pitman and Idler: Bare metal
• Tie Rod Ends: Bare metal
• Tie Rod Adjusting Sleeves: Phosphate and oil
• Castle Nuts and Cotter Pins: Phosphate and oil
• Steering Gear: Power -semigloss black, manual - bare aluminum
• Steering Gear Bolts: Phosphate and oil
• Sway Bar: Semigloss black
• Sway Bar Brackets: Semigloss black
• Sway Bar Hardware: Phosphate and oil
•Drum Brake Backing Plate: Phosphate and oil
• Drum Brake Backing Plate Bolts: Phosphate and oil
• Brake Drum/Rotor: Bare metal
• Lower Ball Joints: Bare metal
• Lower Ball Joint Bolts: Phosphate and oil
• Hub: Phosphate and oil
• Disc Splash Shield: Cadmium
• Kelsey Hayes Calipers: Cadmium
• Wheel Studs: Left - Zinc. Right - Phosphate and oil
• Upper Control Arms: Semigloss Black or bare metal and cosmoline
• Upper Ball Joints: Bare metal
• Upper Control Arm Cam Bolts: Phosphate and oil

Rear Suspension

• Axle Housing 7 1/4” & 8 3/4”: Semigloss black
• Differential Carrier: Bare metal
• Front Leaf Spring Brackets: Bare Metal
• Front Leaf Spring Bracket Hardware: Phosphate and oil
• Front Leaf Spring Bolt: Phosphate and oil
• Leaf Springs: Semigloss black or bare metal and cosmoline
• Rear Leaf Spring Bracket: Bare metal
• Rear Leaf Spring Bracket Bolts: phosphate and oil
• Leaf Spring Shackles: Bare metal, nuts are phosphate and oil
• U-Bolts and Nuts: Phosphate and oil
• Shock Mounting Plates: Bare Metal
• Brake Backing Plates: Phosphate and oil
• Propeller Shaft: Bare metal-blue