Should I change my cam?!
Have you used this particular cam in an engine just like his?
More likely that is a 110 LSA cam. Then
(268+272)/2 less (2x110)= 50 overlap
not in a 318, not with 3.23s, and not with an automatic,with a 2200TC, and not at 9.1Scr.
but I ran a similar cam; a
Hughes HE2430AL; 223/230/110/ .538/.549 lift at 1.6rockers; Years later published as
270/276/110/53 overlap;
that's pretty close right?
At 3650 pounds, it went it went an easy
[email protected], on 245/60-14s, shifting at 7000;on it's first and only run.
Scalded dog is an understatement;
It would smoke 245s at will, and it took 295s to tame it, which would still bust loose at 50/55, in second gear, just with a foot-stomp.
But;I ran it;
in a 367,with a manual trans,and 3.55s. At~180psi cylinder pressure ~11/1 Scr,