EZ Wiring Alternator Wiring (Denso)

I used the denso 60 210-0106 which is internally regulated. When I installed mine I ran the reference to the heavy wire off the battery at the starter relay. This ensures the alternator is compensating for any drops in the wiring. The wire for the light I removed completely from the plug. The switched wire if I remember correct I used the blue wire off the ballast resistor that would also supply the electric choke etc. Like the instructions here.
http://arengineering.com/wordpress/wp-content/uploads/AR019-Denso-Alternator-to-Big-Block-Kit.pdf