No Brake Lights

Double check with the pedal depressed do you have power on the white wire into the turn signal switch. That is brake switch power out of the switch going into the turn sig switch If you have that and the turn signals work, then, bad ts switch. Double check and wiggle the hazard switch

Ok, We wiggled the hazard switch in the on and off position. with my jumper wire in place. It is 12 gage wire with 2 spade ends connected to the red and white female ends from the brake switch. The red wire has 12 volts.

Looks like we will be changing the turn signal switch. Are there any good brands?