Christmas Presents, Whatcha Get?

-

12many

Well-Known Member
Joined
Dec 14, 2016
Messages
3,571
Reaction score
4,687
Location
SC
Got my presents in time for Christmas, and they're just what I always wanted! Best christmas presents ever! LOL And what better time to do some final intake porting in my "kitchen" while the little lady does her thing in hers! :lol:

IMG_20191224_153758.jpg


IMG_20191224_160851.jpg
 
Last edited:
I'd like to see the EQ heads that your replacing these with under my tree, but I'd happily settle for some video of this beast at it best when you get it going instead.
 
Santa must be a dumbass, those were supposed to be delivered here Ga, just can't good help no more ! congrats
 
Those are a work of art, a nice looking top end you have there. Is the quality as top notch as we hear?

I would loved to have had a set of the TF's too, but since I'm staying at 340 or 360 cubes for my single turbo build, I just went for the Speedmaster 170's at Black Friday. Thanks for sharing the pics!
 
A fruit basket and a big block short block delivered on Christmas Eve.
 
picked up two sets of ported cylinder heads and ported Victor 340 intake manifold.......
nothing is more beautiful then the drive from Vegas to Indio Ca and back....
And had to buy Crackedback lunch again....oh...and got a Fiberglass front bumper for a Duster from Crack...
 
Those are a work of art, a nice looking top end you have there. Is the quality as top notch as we hear?
I would say so. Big hunks of quality alloy with outstanding machining work throughout. But don’t take it from me, the very experienced here have commented positively on them and I’d assume most aren’t easily impressed.
 
Whose Rocker arms are those?
Erson 1.6 with smaller diameter thicker wall shafts with bushing/sleeves at each mount point that are the same diameter as a stock shaft, so rockers have more material around the needle bearings.
 
Let us know how they work out. How well they sit, set up, etc....
Erson 1.6 with smaller diameter thicker wall shafts with bushing/sleeves at each mount point that are the same diameter as a stock shaft, so rockers have more material around the needle bearings.


Christmas Presents, Whatcha Get?

Oh, I got jack chit on what I wanted BUT I got everything I needed.
And with what I already have, I didn’t know I needed anything else.
Want? That’s a whole nuther topic! Ha ha ha ha
 
I got a new set of SM heads for my BB Dart project, and have a valve spring tool on the way so I can disassemble them to do a once-over. So far I am pleased with them. I will need to clean them up a little but at this price, who cares?
 
Santa’s running about a week behind but he’s coming....He did send a conformation yesterday telling me. Lol but the elves have down tools on some hard parts I’ve placed an order on.

AA22171E-FC15-40E3-AD9E-63B5BED4A129.jpeg
 
I have the world's best wife. A couple of cool Mopar shirts, a Mopar hat...and an official "Keep America Great" hat direct from the Trump campaign!!

And some other less important stuff, lol.

IMG_20191225_084437.jpg
 
picked up two sets of ported cylinder heads and ported Victor 340 intake manifold.......
nothing is more beautiful then the drive from Vegas to Indio Ca and back....
And had to buy Crackedback lunch again....oh...and got a Fiberglass front bumper for a Duster from Crack...
Scored front and rear fibreglass bumpers for the Dart. Need to find someone that does Cosmichrome for the ultimate stocker look.
 
As I have gotten older (my SSN is in Roman numerals),my thumb joints are always sore, and when opening cans and jars and such they hurt like hell. So I get up this morning and the GF hands me one of my presents, electric can opener, and what the hell, the plug is cut off !, She say's she didn't want me to get shocked since I have a pacemaker/defib in me and not supposed to be around large electrical currents.
 
-
Back
Top