Center Console Proper Mounting

MoparMike1974 said
Like Zigs said, start with the shifter with linkage connected. Set shifter so linkage is perpendicular. The vertical part of the linkage should be straight. Once the shifter is in place everything else should fall into place.
Small tack welds on everything until you are happy with the fit. Makes it easier if you have to do any final adjustments.

Thats the way I did mine...starting with the "linkage pole"(the post that goes through the floor) make sure the shifter and linkage are positioned properly...attach the brackets to the console itself, position and tack-weld (remove console carpetting)....then the other stuff falls into place. You'll also need the wiring for the console shift light and back-up switch and cig. lighter (if required), and the trans bracket for the torque shaft.