1963 Dodge Dart 270 Convertible for the Wife
Epoxy is dry so lets pick something to reassemble.... Wiper motor sound good...
The cloth shields are falling apart. Put some modern heat shrink tubing on them to make sure they don't short out...
Cut the groves back in the slip ring with a razor saw...
Polished up ready to go...
Brushes are only 1/2 wore out more than a life time worth for a car that will never see the rain again :)
Install the end cap with the brushes..
Now install on the housing making sure that they will not contact the armature as they travel up past the magnets.
A little larger tubing to hold them together and out of the way of the armature..
Working them through the gear housing and alining the bolt before pulling it tighter..
Marking the color of the wires since they are all black now...
Wave washer on the outside and the brass washer on the in side. The gear washer only will fit one way in the gear, don't force it...
Epoxy is dry so lets pick something to reassemble.... Wiper motor sound good...
The cloth shields are falling apart. Put some modern heat shrink tubing on them to make sure they don't short out...
Cut the groves back in the slip ring with a razor saw...
Polished up ready to go...
Brushes are only 1/2 wore out more than a life time worth for a car that will never see the rain again :)
Install the end cap with the brushes..
Now install on the housing making sure that they will not contact the armature as they travel up past the magnets.
A little larger tubing to hold them together and out of the way of the armature..
Working them through the gear housing and alining the bolt before pulling it tighter..
Marking the color of the wires since they are all black now...
Wave washer on the outside and the brass washer on the in side. The gear washer only will fit one way in the gear, don't force it...
