Rhoads Lifters On Solid Lifter Cam - Setting Valve Lash

It’s an interesting idea....... but I don’t think the effective lash being vastly reduced as the rpm goes up is going to yield positive results....... for the same reasons that running the lash too tight with regular solid lifters doesn’t often work out very well.

With no lash, the clearance ramp starts to become part of the timing events.
Unless the cam is tiny, I’m not at all optimistic about the outcome.

But it’s a fairly basic test.
If it doesn’t work out, just put solid lifters in it.

A set of EDM solids is only about $200+/-