Rhoads Lifters On Solid Lifter Cam - Setting Valve Lash

on the right track
I've had no problems with the stock 6 rockers but will check out the bbc- what exctly and are they still available? Same reason I've never put on the roller tip rockers
I have used AMC lifters and hollow pushrods for years- works great and same cost
I also like cup on the adjuster as it gives a little longer pushrod
I've also drilled the rockers for ford size cup adjusters and to straighten out the adjuster angle and to increase the ratio (on the mopars)
I like your 7/16 stud I'm still on 5/
on the boat motor I'm running a remote oil filter and cooler and remote oil pressure relief (first made of a BBM pump with some passages plugged- so easy to change the spring
pump is a hv with stiff spring as the remote actually sets the pressure at the far end of the block