Chamber size for iron head stroker

Spoke to Austin at SCAT. Very helpful.
Icon 983 (forged) has a 27 cc dish - very close to the 26 I thought would be needed.
CH = 1.445
With zero deck at 1.462 (Magnum block 9.585) this puts it 0.017 below deck.
With the deck cleaned up by 0.010 it comes in right at 9.5 CR. (unfortunately I forgot to ask what gasket is in the equation :() Edit: 0.040 gasket.

For this combo he suggests the cast crank for $1600 shipped, no tax. Forged would be $2100.

We spoke about quench. He sees no issue with detonation, and does not think performance will be harmed by the dished piston. He has many happy customers running that piston.

I'm going to check the piston depth at 4 corners and cc both heads to verify actual of 61 cc. I'll find out what gasket is in the equation and might use a slightly thicker one. Edit: 0.040 gasket.
Of course I'll have the block work done before ordering.

I'm comfortable with Austin's advice. I'm guessing some may disagree. Feel free to comment, or offer any other tips.