What are your thoughts on this cam

you have the 1.6 rockers? get with B3
and ask Jim about edm lifters if you need new lifters
or the Rhoads ones
heads all together with springs if so check with Jim to see if they are the right ones
still need to check the heads not just out of the box
light retainers or light anything helps if you are getting the heads bare
what did you figure your compression will be- jim can tell you where to install it
quench and head gaskets?
I am always in favor of running what you have to get a baseline
(except for a much to big comp cams suggestion in another thread - send it back)
CHEERS