[SOLD] Erson RV-10-M SB Cam Lifter Set

-
Status
Not open for further replies.
xLURKxDOGx

xLURKxDOGx

"An angel fat, at satan's feast"
Joined
Dec 27, 2013
Messages
4,361
Reaction score
1,754
Location
PHX
Rating - 100%
99   0   0
Contact seller
Good used condition, comes with lifters. Asking 55$ plus shipping.

Not sure the correct specs, this cam is from the mid to late 90’s on a what appears to be low mileage engine.

Thanks,
Jake

351BD3BA-E8AC-424C-A37C-6165992BEBB7.jpeg


4423A9B9-A780-4DF8-9F5D-E114A787E1FE.jpeg


4A73E432-FFDB-4A0F-BC8A-A0A402CA18EB.jpeg


5DB61F56-BD25-4D79-99AE-1EDE8DB67138.jpeg


2E61C9C4-4934-46AF-8AC6-4500FE05C02B.jpeg


E9CE08BB-D4B3-446F-A2BC-7082B38C8166.jpeg
 
That's supposed to be an H instead of an M. It was mis-stamped the first time and corrected. Those old Erson grinds ended in H for Hydraulic and M for mechanical.

Here it is. Look on page 33. It's second from the top. Nice little street cam.

http://www.hivolume.info/catalogs/Erson1999.pdf
 
xLURKxDOGx said:
That’s odd because it’s got mechanical lifters. I’ll do some more research, thanks for the info @RustyRatRod

Jake
Click to expand...

Really? That is unusual. If you look in that catalog, you see in the slant six cams there WAS an RV-10M. That's what I THOUGHT happened. Was that it got mis-stamped. But, I am SURE there could have been and probably was an RV-10M cam for the small block too. It sure looks like it's worn very well, so I am sure it's a mechanical cam if the lifters are mechanical. Do you have a dial caliper? If so, here's what do. Measure the lobe from base circle to peak. Write that number down. Now, measure the lobe from the SIDES. This is the base circle. Write that number down. Now divide the base circle number by 2. Now subtract THAT number from the total lobe number you got the first time and that's the lift. We can zero in on that beeotch from there.
 
Still available. Nice solid cam thats a little hotter than stock.

Jake
 
Did u ever measure it. Do this: measure intake and exhaust lobes at the tallest point and the widest point. Lmk what the diamentions Kim
 
Still available. Can get numbers if people are serious about this absurdly priced cam/lifter.

Jake
 
Found the information on this cam. http://www.pbm-erson.com/UserFiles/Documents/CamCards/470301.pdf

Erson Cams 8000 Old 3rd Street Rd Louisville, KY 40214 PH: 800-641-7920 Part No.: E470301 Grind: RV10M Intake RV10M Exhaust 111+4 Lobe Separation Angle Overlap: 32 Intake Opens: 20 Exhaust Closes: 12 Intake Closes: 54 Exhaust Opens: 62 Running Clearance: 0.022 0.022 [Hot] Valve Lift (Int / Exh): 0.435 0.435 Duration (Int / Exh): 254 254 Checking Figures @ .050" Tappet Rise Overlap: -12 Intake Opens: -2 Exhaust Closes: -10 Intake Closes: 32 Exhaust Opens: 40 Duration Intake: 210 Duration Exhaust: 210 Lobe Lift Intake: 0.290 Lobe Lift Exhaust: 0.290 Intake Center Line: 107 Rocker Arm Ratio: 1.50 /1


Jake
 
Status
Not open for further replies.
-

Back
Top