1969 Dodge Dart - Parking Brake Switch

The parking brake switch is above the shaft. It takes a barrel connector (male end IIRC)

The push switch on the boomarang shaped part is the switch that grounds the lamp. IIRC the wire is black.

View attachment 1715455423


The wire will have a male SAE connector
View attachment 1715455430

That is correct. OP you can check the operation of the circuit by going out under the hood, down by the exhaust/ front frame and disconnect the brake warning switch wire. Ground that with the key on and the brake warning lamp should energize. Same wiring, splits off to the two switches

brakewarning.jpg