340 Static Compression Numbers and Test Procedure

Thanks Mattax this thread has kinda evolved into several threads of interest here. I am now exactly at this threshold yank and tear the whole thing down or start peeling back the engine part by part inside the bay. I got the 3.55's in today and the engine just does not seem to be making any power. So I now know I have a major issue or major issues. I am leaning towards pulling it out but I am not all that experienced at diagnosing assembly issues. But I guess this is how I am going to learn.
Before you pull the motor out one thing you could try is to put 110 race fuel in the tank. Give it the timing it wants without worrying about detonation. See if the motor runs to your satisfaction fully tuned and no compromises on timing. Hopefully this will narrow things down a little. If the motor still doesn't run well then just lowering the compression probably isn't going to help much. it would be better to know this before you tear it down.