Flywheel/Clutch ideas

The Lakewood fit in my Dart after I flattened the pinch weld back against the trans tunnel.
(Pro tip: do this BEFORE installing the engine and bellhousing) ;) Their instructions say that it can be used with a 10.5" flywheel, and that an 11" can be used but it's such a close fit that some grinding on the housing may be needed.

I put in a Centerforce DF clutch and a steel flywheel - don't remember the weight though, but I think it's the one 440source has (27 lb). Centerforce says their clutch can handle 590 ft-lb. Not sure how long it will last with hard launches though.