[SOLD] M1 big block intake

-
Status
Not open for further replies.
rtdodge1

rtdodge1

Member
Joined
Jan 2, 2011
Messages
19
Reaction score
13
Location
north caroilna
Rating - 100%
1   0   0
Contact seller
What I have here is a new m1 big block manifold for use with stage v1 heads on a RB engine. part# showed in pic. $200 plus ride.

M1.jpg


M2.jpg


M4.jpg
 
Last edited:
Ok, so I was thinking stage 6 aluminum heads. But It fits the max wedge that is the same width as the 440. So then I’ll have to pass as it’s not the 1 I need. Thanks. Kim
 
This is from memory but IIRC an RB intake is used on the B wedge with the Stage VI heads. The RB running Stage VIs used either this wider manifold, or spacers and the std RB intake. Could be wrong but I think that was it.
 
The stage v1 head intake ports are raised . Thus taking a different intake to match the heads. This intake fits the RB engine.
 
Last edited:
I have a 400 based 470 stroker with stage6 heads. RB intake bolts right on no problem. So then ur intake is standard port or max wedge port. Can u measure the ports. I want to be able to bolt the intake on to a RB stroker with no spacers. Kim
 
rtdodge1 said:
This intake is for a RB engine with stage V1 heads with standard port size.
Click to expand...

I was interested too, I have cnc`d standard , raised port heads w/ a little custom fitting around the port entrance .

Not max wedge ----------
 
Status
Not open for further replies.
-

Back
Top