Long valves on W2's with .600 lift?

Krooser said
Okay...here's the cam suggestion for my dirt motor from Mike Jones... Just remember the 294 CFM intake flow and a 7200 rpm limit.

I have to admit I'm not seeing enough lift here BUT Mike's cams are hard to beat. His stuff kicks *** and I'm so impressed that I am having a hard time deciding on what to run.

Waiting for Howards reply... may never come!

Here's what I recommend.
Cam# Chr360, M74375-77370-106
250/255 @.050"
.375"/.370" Lobe Lift
106 LSA
Price: $263.32

Lifter# J904MH
.904" Mech F.T. lifter w/.024" oiling hole in lifter face
Price: $168.36

If you want to run a beehive, I recommend the PAC 1235
PAC-1235 Hemi 5.7L, 6.1L 0.600 Lift Drop-In Ovate Wire Beehive - 1200 Series Beehive - Valve Springs - Products | PAC Racing Springs

My reasoning for trying a beehive spring...

Ok so I am curious how you intend to run your oiling system on this motor. Obviously with a lifter with a .024 hole and pushrod oiling, you are not cutting oil to the tappets. Can you elaborate on your total oiling plan for this motor. I know this is a valve train thread, but they are interrelated.