Steering Wheel Lock Plate

RedFish said
That pin is tapered. With wheel positioned up (or master spline up) the pin drives out toward drivers door glass.

jonn6464 said
Grab a torch and put some heat on it, and give it a squirt of penetrating oil. WD-40 has some in a spray can. If that doesn't work, grab your drill...

Thanks to jonno6464:thankyou: and Redfish :thankyou:(and Harbor Freight), the Pin is OUT . :thumbsup:
Dripped the last precious few drops of KROIL (best penetrating oil I know of) I had, bought a full set of punches, add in my BFH and drove it :BangHead:toward toward the door glass.

Thanks also for letting me hijack the thread, too.

UNSOLICITED TESTIMONIAL

I am not a regular visitor to Harbor Freight. In addition to the 8 different size punches (with a Lifetime Warranty) I also scored a 12 inch long shank 3/16" diameter twist drill bit, got a free light, paying about $10 for the lot of it. Most of the stuff in the store is Chinese sourced. If I want # 1 quality, a tool I plan to keep, I will probably not look too hard at HF. However, if I need something specialized, fast and cheap, I may be taking a look. [I didn't see any LH twist drill bits in there. I use them in lieu of an EZ-Out in some circumstances.]