[WANTED] Junior Dragster

-
Status
Not open for further replies.

roughidle

Super Platinum Member
Joined
Aug 7, 2011
Messages
799
Reaction score
25
Location
Pennsylvania
Rating - 100%
6   0   0
Contact seller
I'm testing the waters to see what's available. Not looking to spend 10,000. I'm looking to try and find a used but still certifiable jr dragster to see if my son would be interested to run this year. If you have one for sale or know of one for sale within about a 2 hour drive of Williamsport, PA; please let me know.
 
Racingjunk.com has a good selection. I did my 10 years as crew chief with my son. Lots on fun together. Mark
 
Go to facebook and look at junior dragster swip swap. I find alot of my junior parts there. They always have cars for sale.
 
Thanks for the replies; I had already exhausted both of those options, was hoping to find someone here that may have one stashed away from years ago they wanted to part with. Willing to travel for the right deal.

Thanks
 
He's 9. I'm not sure what to expect for a price, but i'd like to pick up a chassis for around 1k and then build it with him from there. I'm still going to have to find a trailer and all the other items I'm going to need to haul and race.
 
Here is one I noticed on Craigslist, not mine, good luck.

Hansen Jr Dragster - atvs, utvs, snowmobiles - by owner - vehicle...

00u0u_hG6U9IPytcC_1200x900.jpg


“Hansen Jr ready too run with L206,terminator clutch,billet front wheels,Also blockzilla alky motor and full racing gear with helmet and hans device used once.My son wasnt interested,My loss your gain.”
 
Not to many jrs out there for a 1k. If you find one for around 1k the amount of money you gonna spend is not worth it.
 
if you're interested in one in NE Ohio, I have a buddy selling one turn key for i believe 3200. unless he did sell it already
 
Last edited:
Not to many jrs out there for a 1k. If you find one for around 1k the amount of money you gonna spend is not worth it.

I figured if I could find a rolling chassis for ~$1k I could put together one of the 5hp motors I have here to get him started. I know there would be more in the electronics, safety, gears, etc I'd have to get into, but I wanted to be as close to all in under 3k including transportation...
 
If you want I can give you my number I run 4 jrs right now and talk to you about it.
 
I figured if I could find a rolling chassis for ~$1k I could put together one of the 5hp motors I have here to get him started. I know there would be more in the electronics, safety, gears, etc I'd have to get into, but I wanted to be as close to all in under 3k including transportation...

He'll be in the slow category. As long as i can make it consistent, it doesn't need to go too FAST yet...
 
Status
Not open for further replies.
-
Back
Top