Im installing a narrowed diff and a four link rear clip but im paused on ride heigth as im using a magnum front k-member with 2 inch drop spindles.any info to this matter would be great .wondering how it sits with bb on front
Two way adjustable with 3200 springs in back and front has qa1 coil overs but 1.5 inch drop spindles. If that helpsYou'll have to know the springs rate and lower accordingly or just add weight on the front, or set the ride height you want and then when you add springs adjust them after to where it was built.
.
Two way adjustable with 3200 springs in back and front has qa1 coil overs but 1.5 inch drop spindles. If that helps
Yes I have qa1 double adjustable coil overs for the front as the torsionbars are gone. I now have manual rack and pinion as wellCOIL OVER IN FRONT ?
no two cars are the same, it takes time and practice to get the front to rear ride height correct for optimum launch and with a 4 link it may even be different from side to side due to launch torque/chassis "twist" what 4 link are you installing?
good catch, whats up with that sh&tSeven year thread back from the dead.
good catch, whats up with that sh&t
beats me. happennin a lot lately. is it a full moon?
If it pops up ,who cares ??