Flexing a Flex Plate?
Below are the pictures of my crank and TC after about 4 months and 1500 miles. The snout of the TC was tight in the crank when I put it together (didn't know better always a stick guy before). Had the proper clearance between the TC pads and flex plate before pulling it forward. Noticed the crank walking one day and found I had about 0.032 crank movement and a wiped thrust bearing.
Good info on TC dimensions and clearances, surprisingly little out there about this.
Torque Converter info for various transmissions
Below are the pictures of my crank and TC after about 4 months and 1500 miles. The snout of the TC was tight in the crank when I put it together (didn't know better always a stick guy before). Had the proper clearance between the TC pads and flex plate before pulling it forward. Noticed the crank walking one day and found I had about 0.032 crank movement and a wiped thrust bearing.
Good info on TC dimensions and clearances, surprisingly little out there about this.
Torque Converter info for various transmissions
