How to read carb calibration chart?
Just started driving my car and it runs rich enough to burn your eyes, make the oil smell like gas, and make black clouds when you punch it.
It’s a 70 Duster with an 11.5:1 .030 440, edelbrock performer intake, edelbrock 1813 800cfm carb, see cam specs below, has a mechanical/vacuum advance summit brand electronic distributor, vacuum is unhooked and capped off. 800rpm idle base timing set to 17°, fuel pressure is set to 4psi, fresh 93 octane gas, cheap autolite spark plugs gapped to around .045 because why foul out expensive ones.
I want to get this car running 100% and I can’t figure out this chart I found on the edelbrock website. Can someone please explain to me how to decipher this or give me a recommendation on what I should do?
Chart part1
Chart part2
Cam specs
Spark plug after in town driving
I think that’s everything.
Just started driving my car and it runs rich enough to burn your eyes, make the oil smell like gas, and make black clouds when you punch it.
It’s a 70 Duster with an 11.5:1 .030 440, edelbrock performer intake, edelbrock 1813 800cfm carb, see cam specs below, has a mechanical/vacuum advance summit brand electronic distributor, vacuum is unhooked and capped off. 800rpm idle base timing set to 17°, fuel pressure is set to 4psi, fresh 93 octane gas, cheap autolite spark plugs gapped to around .045 because why foul out expensive ones.
I want to get this car running 100% and I can’t figure out this chart I found on the edelbrock website. Can someone please explain to me how to decipher this or give me a recommendation on what I should do?
Chart part1
Chart part2
Cam specs
Spark plug after in town driving
I think that’s everything.
