Mopar Linkages How do I identify them?

66fyssh said
Here's my 5.9 with an Edelbrock Air Gap, Edelbrock 750 hooked up to a 904. I used the original throttle cable bracket and kickdown bracket from the 273. For the throttle cable bracket, I just used a length of steel pipe as a stand off. It works great. I haven't had the car on the road yet to see how the kickdown will work but it seems to be good to go. I should have my power steering gear back from Steer and Gear this week. Then I'll be on the road! Let me know if I can get any other pictures for you.

(The yellow wires are old ones just to get it going. I have a new set of Edelbrock wires that came free with the Air Gap)!
View attachment 1715467274
View attachment 1715467275

I have my Motor done and it is on the stand now, I am going to run a similar set up with a Air Gap intake and a Hughes cam. Can you tell me a little more about your setup? I am running stock heads all I did was gasket matched them and a mild Hughes .500 .506 roller 214* 218* @.50 what size carb do you have?

20200210_123751[1].jpg