[SOLD] Magnum Hydraulic Roller Cam

-
Status
Not open for further replies.

subcom

FABO Gold Member
FABO Gold Member
Joined
Sep 17, 2010
Messages
1,788
Reaction score
1,120
Location
South Florida
Rating - 100%
11   0   0
Contact seller
Oregon grind #1357. Specs here.
Hydraulic Roller Camshaft Specifications

Great cam for you Magnum swap guys. With EQ heads and a stock 5.9 Magnum my car went a best of 7.90 in the 1/8th N/A with this cam.

Video of first start of the engine with this cam. Has a nice idle.


$175.00 shipped to the lower 48. PayPal only please. Located in S. Florida. Thanks
IMG_1295.JPG

IMG_1297.JPG
 
Sorry, what are the specs?

Sorry for the chart, but you should be able to get the numbers.

GRIND DURA@.050 DURA@.006 LOBE LOBE CENTER LOBE LIFT VALVE LIFT @ ROCKER ratio

INT EXH INT EXH SEP INT EXH INT EXH 1.5 1.6

1357 230 236 284 290 112 108 116 322 322 483 483 515 515
 
Will a fuel pump eccentric bolt to this cam or is the Hughes kit required to extend the cam snout?
The Hughes kit is required. I can include the eccentric and the one or two pieces I’m not using from my Hughes kit.
 
Were you able to use this cam with stock magnum lifters and intermediate shaft? Or does it require a bronze gear / aftermarket exposed wheel lifters?
 
Were you able to use this cam with stock magnum lifters and intermediate shaft? Or does it require a bronze gear / aftermarket exposed wheel lifters?
I used the pushrods I listed above with the original lifters, rocker gear and intermediate shaft.
 
Oregon grind #1357. Specs here.
Hydraulic Roller Camshaft Specifications

Great cam for you Magnum swap guys. With EQ heads and a stock 5.9 Magnum my car went a best of 7.90 in the 1/8th N/A with this cam.

Video of first start of the engine with this cam. Has a nice idle.


$175.00 shipped to the lower 48. PayPal only please. Located in S. Florida. Thanks
View attachment 1715449386
View attachment 1715449387



I'll take the cam if it hasn't been sold already. PM sent
 
Status
Not open for further replies.
-
Back
Top