Mickey Thompson breather grommets

-

Phil21502

Well-Known Member
Joined
Jul 27, 2018
Messages
125
Reaction score
21
Location
Maryland
i saw this posted before and searched and searched and can’t find it now. What factory Chrysler grommets fit these valve covers? They take the larger 1.75 or so ones. Not the normal 1.22. Thanks
 
Outdated Holley part number :241-214.. .
I remember Motormite/ Dorman product ,does such.
Good luck .
 
I think the mopar cast valve covers are the same size. I got my grommets from mancini.
 
Gonna go to advance auto after work tomorrow and not leave till I find something that works
 
M/Ts are made by holley, and my holleys did not come predrilled, so i got the grommets first, and then drilled the holes to match
 
Well nothing to be had. Looking like I’m gonna have to weld them up and start fresh.
 
I know they're out there,I bought a set for mine a couple years back.I'll try and think where I found them.For some reason I'm thinking slant 6 Gromets
 
Give me measurements, I will secure you a proper part number.
 
-
Back
Top