Calling all corner carvers!

jbc426 said
One of the best bangs for the bucks is to weld in a complete chassis stiffening kit from US Cartool. I would also make a weld-up, a bolt in Monte Carlo Brace. Stiffening the chassis will make a dramatic improvement in how your car handles.

Adjustable strut rods and 17 or 18 inch wheels and low profile tires will also help a lot. TruBlue72 ( a member on here) has a demonstrated wealth of knowledge and experience with suspension set-ups on these cars. Hopefully he will chime in.

I have already installed the USCarTool subframe connectors and the spring mount inboard kit. Fortunately my car came factory with torque boxes. I will be fabing my own J bars to go from the cowl down to the front frame section and tying into the upper shock mounts. Then I’ll add a removable shock tower brace with some heims.
I’m hoping TruBlue72 chimes in as well!