340 intakes

-

72dustervs

FABO Gold Member
FABO Gold Member
Joined
Jan 20, 2020
Messages
663
Reaction score
366
Location
Winchester, Kentucky
Are these intakes worth buying $100 apiece ?
edelbrock torker 340
edelbrock performer intake

i0000010.jpg
 
I had the torker340 on my 360 and it ran well, better than the torker 2 but go with the performer for a street engine.
 
Thanks for the replies , I hadn't heard much good on the torker , the performer I may get an put back ,,but will probably hunt down a good 340 edelbrock six pack intake for the up an coming project , unless I can come up with funds for fuel injection
 
That performer looks like the #2176, which has the smaller ports for the 318/360. Compare it to the Torker 340. You should see the difference.
 
That performer looks like the #2176, which has the smaller ports for the 318/360. Compare it to the Torker 340. You should see the difference.
Yea I think you are correct , dont think I am going to buy either one , he has a set of M/T valve covers that might be worth more than the intakes
 
The Torker is a $100 doorstop.

LOL Right next to the pinion snubber for a nice shop breeze.

Torker 340's should have been smelted back down to be recast as LD340's.

The 2176 works REALLY well with a little rubbing and is greatly underestimated. The port window stuff is a HUGE red herring... look at the window on a stealth or action plus. IIRC, both are 273-318 yet they get recommended all the time as alternatives to LD/RPM/AG intakes.
 
-
Back
Top