DC K frame question

AndyF said

I highly recommend putting it in the car with a dummy block and then hanging the headers before you go to the work of cutting off the brackets and moving them. If you want everything to fit nicely then you most likely need to do a complete mockup first and go from there.

Click to expand...

That makes sense. There is a lot of variation from car to car so what works on one may not work on another.

I am going to try and install one of the new/smaller power steering boxes as well (will be using 2” TTI headers so things will be tight). I am also considering cutting the steering box mount off and sliding it over as far away from the motor as possible to try and get a little more clearance.