Nitrous plumbing A1A...??..

I would say one thing, if [email protected]+ static, have a tight quench, big CP and your going to run the fuel jet clean as in 5>7 sizes SMALLER than the N jet and run 93 pump, perhaps you should go for all these retard boxes, if not, 2 deg retard with square jetting for up to a 150 shot@6>7psi and for how long your going to hit it with using 110 fuel as you mention....you don't need to spend $$$ on all this stuff, important to have if you plan on going up to 200>250+ shots....Timing is what kills motors yes, but were talking big 250+ shots, it all depends on the combo, how you run the stuff, as you know. I'm not saying its not a good idea, it is but for you its overkill in my opinion at your level, get carried away with it all and its there I guess is the only thing you can say.
Simply put I have a very addictive personality... That's why I don't do drugs or drink alcohol... "I used to do a little but a little wouldn't do it and a little got more and more" guns n roses....lol...
I'm going to order the 70011 Edelbrock cheater plates and I believe they come with 50 75 and 100 Jets. If I'm not mistaken they are square.. when I talked to Mike thermos she talked about the nitrous Jets being about .004 or so bigger...
My concern is being 2 or 4° retarded for 3/4 of my run and only 1/4 of my run using the nitrous. it would seem to me that I would lose power for three-quarters of the time and barely make it up on the 1/4 time I'm using it?..