My 422 smallblock build

Sooooo, this engine has been a very long time coming. I picked up a 340 shortblock about 10 years ago and stashed it in the corner of the garage and proceeded to daydream of building a gnarly-***, tire-frying, rip-roaring beast of a smallblock.
It is dated 7/70 so I assume it came in a 71 model something or other. When I picked it up it was already.030 over with forged Venolia pistons on stock rods with a stock forged crank. I took it to the machine shop and they said it needed to go to .060” over to clean up. Welp, might as well stroke it then!
Sold the pistons, rods, and crank and started looking for new guts.
Ended up ordering a stroker kit from Rod Bloomer @ BPE.
Then the project stalled as I continued to collect parts and pieces and squirrel it all away in anticipation of a day when I would have the time and money to put it together.
And then I started to follow this thread New 408 build finally started
and it lit the fire under my ***.
So now it begins.
I completed almost all of the Guitar Jones oiling mods including tubing the passenger side lifter gallery and shut off the oil to the driver side with a set screw under the #1 main bearing.
I’ll try to take as many pictures as possible and document as I make progress. I am not a professional engine builder so please feel free to chime in with advice, tips, or questions any time. And if you see me doing something retarded let me know.