69 Dart 340 Swinger Street/Road Race build
Nice build. I didnt run a tube inside my LH frame connector, I just routed the parking brake cable inboard of the subframe connector. Still enough room with it re routed. Mine is a 4 speed. Subframe connector is only temp pinned with clecos in the pic. I used transition plates against the crossmember since i welded in 10 gage 2x3 boxed steel and was concerned that welding thick subframe connectors directly to the thinner gage crossmember at a 90° angle will eventually fatigue and crack. Yours look like the US cartool ones. Those are super nice. Green is aircraft epoxy primer
Nice build. I didnt run a tube inside my LH frame connector, I just routed the parking brake cable inboard of the subframe connector. Still enough room with it re routed. Mine is a 4 speed. Subframe connector is only temp pinned with clecos in the pic. I used transition plates against the crossmember since i welded in 10 gage 2x3 boxed steel and was concerned that welding thick subframe connectors directly to the thinner gage crossmember at a 90° angle will eventually fatigue and crack. Yours look like the US cartool ones. Those are super nice. Green is aircraft epoxy primer
