All i can do is rely on my notes, because this was done back in 2010.
However, i found my mistake.
The bowl is only 1.71" the 2.19 was the throat area, figuring in from the 1.71" bowl with 3/8 valve stem.
1.71” “bowl” diameter or “throat” diameter?
Or both?
That’s only 84.6% of a 2.02 valve.
Seems pretty small for a “high effort” type job.
The pic I was referring to about the bowl diameter “looked” like the bowl was still pretty small compared to how much was taken out of other areas of the port.
