DEMON IS READY FOR PAINT
Use the air control knob, on the bottom of the handle, to slow down the air flow. That way you will use less CFM and, hopefully, allow the compressor more time to produce enough air for continuous use. Take your time. Allow at least 20-30 mins between coats, 3 coats would be good. Depends on how much paint you have.
With single stage don't worry about flowing a "wet" coat until the final pass. Not sure if you plan on wet sanding (since you plan to sell it), but tread very lightly with SS paint. 1200-1500 grit at least.
You got this!
Use the air control knob, on the bottom of the handle, to slow down the air flow. That way you will use less CFM and, hopefully, allow the compressor more time to produce enough air for continuous use. Take your time. Allow at least 20-30 mins between coats, 3 coats would be good. Depends on how much paint you have.
With single stage don't worry about flowing a "wet" coat until the final pass. Not sure if you plan on wet sanding (since you plan to sell it), but tread very lightly with SS paint. 1200-1500 grit at least.
You got this!
