Cold Hard Facts - Cold Case Radiator MOP755A
a few more updates, I bought a V8 style 67-69 repop shroud several months ago out of ignorance, while it somewhat fits the old radiator that was in the car it won't fit the new Cold Case radiator without some modification, even if you trim it, it still stands off of the face of the radiator and to me it looks like crap. I ordered a 70-72 shroud but it wont be here for a few weeks to test fit. I believe it will fit better but thinking it will also stick out away from the face to much. I have talked to a guy and will be looking to get a custom shroud built if I can afford it. I had messaged CCJ and he was advised by one of their techs that both the 67-69 and 70-72 shrouds would fit with just drilling holes in the flange but to also call their tech for more info. Since this is new to me I do not know if either of the factory original shrouds would actually fit. this is sort of sucky if you need to get all new stuff, not sure what else is out there to try. I also tried the old shroud that was on the car, per the number it was a \6 shroud, it has already been cut/modified but still set off the face of the radiator, you can see the part number in the picts.. Hope this info helps some others when shopping, couldn't find these things out when I was searching the net. One other thing I ran into was one of the holes for the trans coolers threads were a little buggered up, fairly simple since I had the tap already. I didn't have plans on painting but starting to think I just might.
a few more updates, I bought a V8 style 67-69 repop shroud several months ago out of ignorance, while it somewhat fits the old radiator that was in the car it won't fit the new Cold Case radiator without some modification, even if you trim it, it still stands off of the face of the radiator and to me it looks like crap. I ordered a 70-72 shroud but it wont be here for a few weeks to test fit. I believe it will fit better but thinking it will also stick out away from the face to much. I have talked to a guy and will be looking to get a custom shroud built if I can afford it. I had messaged CCJ and he was advised by one of their techs that both the 67-69 and 70-72 shrouds would fit with just drilling holes in the flange but to also call their tech for more info. Since this is new to me I do not know if either of the factory original shrouds would actually fit. this is sort of sucky if you need to get all new stuff, not sure what else is out there to try. I also tried the old shroud that was on the car, per the number it was a \6 shroud, it has already been cut/modified but still set off the face of the radiator, you can see the part number in the picts.. Hope this info helps some others when shopping, couldn't find these things out when I was searching the net. One other thing I ran into was one of the holes for the trans coolers threads were a little buggered up, fairly simple since I had the tap already. I didn't have plans on painting but starting to think I just might.