Dreaded clunk when turning

Diesel fuel, I put the diesel fuel in an under coating spray gun and put a 3' long piece of clear plastic hose on it.

Then you can reach in from the outer axle opening and wash everything into the center pumpkin area, then mop it out with some terry cloth towels.

Can spray up into the ring and pinion bearings and the front nose cone while turning the gears to wash out the bearings and races. This will drain into the botton of the pumpkin too.

Biggest thing is to wash out the bearings as best you can. Those ring and pinion gears are so hard they can handle any of the small debris that can't get wiped out.

Assemble the unit with new gear lube then change the gear lube right away again within the first 200 miles.

Good to Go