Turn radius to the left

Thanks for all the reply's. I will make sure the Pitman Arm is clocked correctly first, then check for other interference. It does not currently have headers installed, although when i went to redo the engine I was going to install TTI's, so I may switch back to normal ratio Pitman Arm if there is going to be a clearance problem. It was touching the exhaust tube when i first put the front end back together, but have since had a bent pipe welded in to place so it doesn't interfere with the steering.

The lower ball joints are brand new, so once I change the Pitman arm I will look at those as well if the steering isn't resolved.