Planning for 408 - Possible Solid Flat Tappet cams

Im currently running a dinky hyd [email protected]/.517”/106lsa with Air Gap, EQ heads with small intake valves and it’s plenty fun on the street. Runs high 11’s in the 1/4 too. Very streetable as is, but can become a handful in an instant. Around town with 4.10 and 3500 stall it’s a blast, from a stop it blows the tires off all the way into 3rd until I let off, so I go easy and romp from a roll. Doesn’t take much cam to do what I’m doing with the 4” stroke if everything is matched and tuned right. Don’t really think you’re going to get a specific cam recommendation here only that you can go bigger than you think (250’[email protected]”) but if you go conservative (230’[email protected]”) you’ll still have a beast of an engine. Of the three shelf cams you listed that Howard’s [email protected]” would do, why not fill out their request form, then follow up call them and see what they would spec?