68 Dart Heater blower not working.

-
Kendog 170

Kendog 170

Let the boy go !
Joined
Mar 10, 2016
Messages
3,784
Reaction score
3,168
Location
Tewksbury Ma.
So my blower stopped working . I removed my glove box and checked the resistor. Looks fine. I can't remember but blower motor has a green wire to resistor ( Pos. ) and a brown wire I'm not yet seeing (Neg.)that I think goes to Right side pillar behind kick panel ?
I want to jump it direct to see if it's something else before I get my tester out . It kills me as all my garage stuff and parts are in a 28 ' tractor trailer box until I move south next year. I have 2 blower motors I can't access. :BangHead:
 
Last edited by a moderator:
Brown ground wire from resistor has two ground connections. It first goes to hold down bracket at heater core inlet/outlet, then goes to ground behind right kick pad.
 
This is real simple. Check for power on the plug going to the blower motor.
 
Treblig said:
If your memory is "short" it's not "Good" ????:poke:
Click to expand...
It was a joke . I didn't have a tester when I took out the glove box but I have one now to check switch. I installed some speakers in the kick panels so I'm hoping somehow I messed up the ground , but my luck it won't be the case.
 
You must log in or register to reply here.
-

Back
Top