[SOLD] Small Block Howards Solid Flat Tappet Cam - New

-
Status
Not open for further replies.
R

Rocket

FABO Gold Member
FABO Gold Member
Joined
Apr 22, 2005
Messages
2,821
Reaction score
847
Location
U.S.A.
Rating - 100%
136   0   0
Contact seller
For sale is a new Howards solid flat tappet cam part # 712361. Specs are as follows:

Basic Operating RPM Range: 3,400-7,400
Intake Duration at 050 inch Lift: 240
Exhaust Duration at 050 inch Lift: 255
Advertised Intake Duration: 292
Advertised Exhaust Duration: 302
Intake Valve Lift with 1.5 ratio rocker arms: 0.540 in.
Exhaust Valve Lift with 1.5 ratio rocker arms: 0.555 in.
Lobe Separation (degrees): 108
Intake Valve Lash: 0.026 in.
Exhaust Valve Lash: 0.026 in.

Camshaft Manufacturers Description: Lopey idle. Oval track, street/strip with 10.0:1+ compression ratio. Auto needs 3,500+ stall.

Price is $130 shipped in the lower 48 states. I will ship internationally for the additional cost.

P1060059.JPG
P1060060.JPG
P1060061.JPG
P1060062.JPG
 
What size motor did you run this in? Did you use the car on the street. Is it too big of a cam for a 408? I want a snapy/peppy car on the street.
 
It is new. I have not rune the cam. Plan was to use this in a 416. Should make a good street strip cam with the right gear and converter (or manual gear box).
 
I believe this cam is ground on a 904 lifter friendly core. Only two Howard's cams are like this the rest being Chevy grinds.
 
cawcislo said:
Is it too big of a cam for a 408? I want a snapy/peppy car on the street.
Click to expand...
IMO, this will make for an excellent street strip cam.
I myself would run it with 1.6 rockers & fully ported heads w/a also fully ported RPM-AG & 1-3/4 headers.
It’ll rock.
FWIW, Rocket is a good fella & seller.
 
Status
Not open for further replies.
-

Back
Top