Clocking a 2 speed wiper motor??

Mike69barracuda · Mar 5, 2020

I removed my airbox to put in new DMT seals and removed the wiper motro from my 69 Barracuda. So I don't have a twisted mess reinstalling the wiper motor and linkage. What should I do to ensure I don't connect the linkage to the motor at an incorrect position. I ran the wiper motor out of the car, so the positon is different for the wiper shaft then when I removed the wiper motor. If that makes sense. THX in advance.

I8NEMO · Mar 5, 2020

There's a schematic that shows how to "park" the motor. Bench Test Mopar 2 Speed Wiper Motors- Concealed and Nonconcealed . Run the motor per the diagram for "park" and it will "park" where it needs to. reassemble linkages and install blade arms at "parked" position.

TrailBeast · Mar 5, 2020

Mike69barracuda said:
I removed my airbox to put in new DMT seals and removed the wiper motro from my 69 Barracuda. So I don't have a twisted mess reinstalling the wiper motor and linkage. What should I do to ensure I don't connect the linkage to the motor at an incorrect position. I ran the wiper motor out of the car, so the positon is different for the wiper shaft then when I removed the wiper motor. If that makes sense. THX in advance.

If the wiper motor "parked" when you shut it off you are good to go.
If it didn't or you are not sure, hook it up and let it park then put it the rest of the way together.
Leave the wiper arms off till last just to be safe.

Clocking a 2 speed wiper motor??

Mike69barracuda

Well-Known Member

I8NEMO

FABO Gold Member

TrailBeast

AKA Mopars4us on Youtube