Wire identification

-
1badazdart

1badazdart

Well-Known Member
Joined
Nov 21, 2009
Messages
287
Reaction score
126
Location
Holiday Florida
I am wiring up a 68 dart my question is on the plugs that go into the bulk head I want to test all the wires each plug goes to different parts of the car can someone tell me what wire goes where
For instance plug one has what wires in it plug two has what wires in it plug three has what wires in it picture and id the wires would be a big help
 
Go to MyMopar. Read around. Not only are there MANY factory service manuals, but there is also simplified 3rd party wiring diagrams. There's lots of info over there including the factory tech stufff (Master Tech Service Conference)

MyMopar - Mopar Forums & Information - MyMopar Tools/Reference

Then come back here and we can step you through the "rough" spots

READ THIS!!!! Some of the factory manuals in those years had a MISTAKE at the bulkhead connector concerning (I believe) the horn wire and the yellow "start" wire going from the ignition switch to the start relay. You will quickly see that just be aware
 
67Dart273 said:
Go to MyMopar. Read around. Not only are there MANY factory service manuals, but there is also simplified 3rd party wiring diagrams. There's lots of info over there including the factory tech stufff (Master Tech Service Conference)

MyMopar - Mopar Forums & Information - MyMopar Tools/Reference

Then come back here and we can step you through the "rough" spots

READ THIS!!!! Some of the factory manuals in those years had a MISTAKE at the bulkhead connector concerning (I believe) the horn wire and the yellow "start" wire going from the ignition switch to the start relay. You will quickly see that just be aware
Click to expand...


Thanks for the info
 
You must log in or register to reply here.
-

Back
Top