Ron Francis retro wiring info

hey all
we are in the process of rewiring our 1972 Demon with a Ron Francis retro 95 kit and I would like to use the stock ignition wiring and turn signal wiring on the steering column
Does anyone have the proper wiring diagram for those so we can get this project moving forward

We are having some issues

Thanks for the help

Call Ron Francis and get the info they should have sent you.

They just send me a standard dodge wiring diagram
they want me to switch to a gm column
But I will call them on Monday

They want you to switch to a GM column ? I would tell Ron Francis that maybe I should switch to a painless Harness and send there's back. Ron Francis has the worst customer service I have ever dealt with. Here is another example of how sh#@y they really are.

I will follow there diagrams and hopefuly it will be ok
I think we have to put the factory info away and use the kit as it was designed

I’ve got the Ron Francis wiring harness in the box and what I planned on doing was just splicing there wiring into my mopar column plug.

Bear in mind most/ all of these universal outfits don't deal with stuff like TS connectors. They don't want you to switch to a GM column----they want you to use a GM TS connector. Also, most these harnesses don't address the infamous IGN1/ IGN2 setup on Mopar ignition switches so you might have to add a wire or two

I don't care for how some of these are wired, tho I can't come up with a good example. Such things as whether some accessories are "on" with the key in accessory. If I'm parked listening to the radio, I'd like my wipers to be active, for example........in the rain. I actually changed some of the fuse panel wiring myself. You just have to sit down and diagram it all out