I may take my beater with a heater Ram 1500.
2019 summer race.... Jadaharabi vs 318willrun
- Thread starter 318willrun
- Start date
-
I may take my beater with a heater Ram 1500.
Hey @dartfreak75 how's it going?
Any progress?? They canceled our big storm for tomorrow. They were predicting snow of 6-12 inches and now they are saying less than an inch.
Any progress?? They canceled our big storm for tomorrow. They were predicting snow of 6-12 inches and now they are saying less than an inch.
4-8 inches starting tomorrow afternoon. We will see.
F350 still in shop waiting on a new GEM and drivers door module and engine heater electrical cord.
Drivers door X15 mod u la tore controls the shutting off of the heater and radio.
dartfreak75
Restore it, Dont part it!
Hey buddy I'm good! Been absent a while but I'm back now. I'm actually working on my car today got some nice weather on my two days off. Did you ever get your dart sport race ready?
Spent the afternoon getting the dually started and taking it from the repair shop to the windsheild shop to have the seam sealed. I keep telling the shop that they need to unhook the batterys untill the GEM is replaced but nobody is listening.
Still looking for part of the Darts wiring harness but the engine is down in it. Found all the bolts for mounting it and the cross member.
Last edited:
Is the Ford running good?
After I got it started it acted like the fuel was jelling for about 10 minutes.
It did however start by the key and glow plugs.
dartfreak75
Restore it, Dont part it!
Yea I think my parts are gonna be a pain to locate I know I have them but where Is gonna be the issue. With the unexpected move last year all my car parts just got threw in boxes. I found my head bolts in the back seat of my truck
Yea I think my parts are gonna be a pain to locate I know I have them but where Is gonna be the issue. With the unexpected move last year all my car parts just got threw in boxes. I found my head bolts in the back seat of my truck
Lol at least you found them.
dartfreak75
Restore it, Dont part it!
God only knows where everything else is lol I lost the bolts to the cam thrust plate I was going thru some boxes the other day and found a hole it the bag with the plate the bolts are missing. I'm gonna have to buy new ones I guess
Indy is coming up quick! I am trying to make some pocket money!
It looks like 2 of my 3 son's will be able to go. The youngest may have to work.
well, I woke up to snow this morning and the salt trucks are lay'n it on... LOL
Walmart has the packets of 10 pair of hand warmer on clearance for $2.50.
They have the body and the foot warmers also on sale.
Plus I have my battery heated Milwaukee hooded sweatshirt so I plan to be warm no matter the temp.
Cool! On second thought....Warm! I will have to check out our walmart.
@Stephen Hotz "The new phone books are here, The new phone books are here." (Steve Martin, The Jerk)
Got the magnum to la drill jig today. Have not opened it yet to admire it.
Thanks, I hope to try it out this weekend.
Got the magnum to la drill jig today. Have not opened it yet to admire it.
Thanks, I hope to try it out this weekend.
They arrived a day early. Cool deal.
I still want to make up an aluminum set.
I got one pair done and took then to Indy this pastweekend. Lot of interest but no buyers at $100 for the pair.
What is wrong with people?
kgip2k
Well-Known Member
That's a good price, probably too cheap tho, scared everyone away.
Only sold 3 452 bb heads on Sunday. lol
But finally had time to do a little buying.
AMD Duster patch panels l & r
LD340 intake
Mopar red, ehite and blue flag
Ebody clutch pedal setup(I don't need)
Heater blower mounting bolt
Aluminum diamond plate tailgate cover for a 70 Dodge pickup. Been looking for one of these for a long time.
Bought a used pair of 340 Duster rear leaf springs. Going to try to tie them in a knot with my Slide-a-links.
So I didn't sell much of anything on Sunday like I have in the past but I had a good time shopping.
Plus I got to play with a buttheaded ebody swapper that needs to learn to turn to the left where there is of pleanty of space to get out. I think he was a bully. he want to use my swap space to turn right. I think a torsion bar might be able to change his way of thinking. After I told him I wasn't going to move anything else and if he wanted to sit there until the whole thing was over so be it or he could just turn left and drive out the other end of the building. I love playing with bullies. Usually the only thing they don't expect is resistance. Resistance can be my middle name if you'd po me. And he was trying to real hard. Put my gentle disposition and my just downright goodness on trial is what he was doing..
We did have a super time at the swap meet.
But finally had time to do a little buying.
AMD Duster patch panels l & r
LD340 intake
Mopar red, ehite and blue flag
Ebody clutch pedal setup(I don't need)
Heater blower mounting bolt
Aluminum diamond plate tailgate cover for a 70 Dodge pickup. Been looking for one of these for a long time.
Bought a used pair of 340 Duster rear leaf springs. Going to try to tie them in a knot with my Slide-a-links.
So I didn't sell much of anything on Sunday like I have in the past but I had a good time shopping.
Plus I got to play with a buttheaded ebody swapper that needs to learn to turn to the left where there is of pleanty of space to get out. I think he was a bully. he want to use my swap space to turn right. I think a torsion bar might be able to change his way of thinking. After I told him I wasn't going to move anything else and if he wanted to sit there until the whole thing was over so be it or he could just turn left and drive out the other end of the building. I love playing with bullies. Usually the only thing they don't expect is resistance. Resistance can be my middle name if you'd po me. And he was trying to real hard. Put my gentle disposition and my just downright goodness on trial is what he was doing..
We did have a super time at the swap meet.
kgip2k
Well-Known Member
Sounds like you had a pretty good time. Wish I had the spare cash for a set of drilled mag heads, but I am on hold until I figure out my truck, or Ramcharger
You know you and I can make a $47 deal as a percentage of the total.
A little bit of an up date.
Ford still in shop waiting on a part.
But the windsheild is no longer leaking.
Dodge beater with a header is still driveable.
Positive virus person found working at airport one mile away, yesterday.
Great news.
Found 4 more rolls of TP in spare bedroom. Now have 12 rolls in reserve..
They were fighting over paper products in the dollar general store about 3/4 of a mile away from us yesterday. It was on the evening news last night.
Oh yeah it's been snowing today.
Ford still in shop waiting on a part.
But the windsheild is no longer leaking.
Dodge beater with a header is still driveable.
Positive virus person found working at airport one mile away, yesterday.
Great news.
Found 4 more rolls of TP in spare bedroom. Now have 12 rolls in reserve..
They were fighting over paper products in the dollar general store about 3/4 of a mile away from us yesterday. It was on the evening news last night.
Oh yeah it's been snowing today.
Last edited:
-
