95 Dakota build

I forget what slantsix64 cam is he has a oregon hr regrind that worked with carb 5.x
you might look for his thread on fabo or pm him in case i spelt his handle wrong
with the od and the gears you have I think the under 260 would be better
if you had the 3:91s might be different but still I think those two bigger cams would like more compression and might need head work
use the .028 Mr gasket gaskets
ps with a stock exhaust you need to hold the overlap down so don't go nutty with a narrow LSA
and do plan on degreeing your cam especially with a regrind they make the new lobe fit where they can- but ask the grinder