[FOR SALE] Console tach

-
Status
Not open for further replies.
4

4 speedin

Well-Known Member
Joined
Aug 4, 2014
Messages
434
Reaction score
117
Location
california
Rating - 100%
6   0   0
Contact seller
I have two console tach's for sale. One is very nice with just a few small flaws and the other not as nice, they both have bases for them. The nicer one is $525 and the other is $350 plus shipping. First set of pic's is the nice one last 3 are the other. Tach #2 in the last three pics is sold!

FRAR6117.JPG


OGII4957.JPG


IMG_2686.JPG


IMG_2685.JPG


IMG_2684.JPG


IMG_2683.JPG


IMG_2678.JPG


IMG_2677.JPG


IMG_2679.JPG
 
Last edited:
I can only check the light now because the water pump pulley is out getting powder coated, The lights work on both of them.
 
That sounds great but the wire colors are black /ground orange /Light violet /power and green / trigger from what I read.
 
4 speedin said:
That sounds great but the wire colors are black /ground orange /Light violet /power and green / trigger from what I read.
Click to expand...
Well, its only 1.5 volts (shouldn’t hurt anything), so try both violet and green... one should work. Black will be ground(-) regardless.
 
Can I get the part number if there is one for the pedestal base from you?
 
So I guess I'm just wondering if the base 4 speedin has on the better of the two techs is factory and what its supposed to look like. That's a nice Billet base though
 
We are getting good info, but folks this is a for sale thread, is the Billet base for sale .
No chitchat in for sale threads, take it to a new thread or private message
 
Dickie said:
So I guess I'm just wondering if the base 4 speedin has on the better of the two techs is factory and what its supposed to look like. That's a nice Billet base though
Click to expand...
Dickie...yes OP's is original, and hard to find.

Sorry Mike...just trying to save prospective purchaser the frustration of getting his hopes up of finding a used one.
 
65Val said:
Good luck finding just the base. I looked for years, then had one made out of billet aluminum......

View attachment 1715491518
Click to expand...

4 speedin said:
I have two console tach's for sale. One is very nice with just a few small flaws and the other not as nice, they both have bases for them. The nicer one is $525 and the other is $350 plus shipping. First set of pic's is the nice one last 3 are the other. Tach #2 in the last three pics is sold!

View attachment 1715486589

View attachment 1715486590

View attachment 1715486591

View attachment 1715486592

View attachment 1715486593

View attachment 1715486594

View attachment 1715486595

View attachment 1715486596

View attachment 1715486597
Click to expand...
is the factory threaded shaft missing?
 
Status
Not open for further replies.
-

Back
Top